Everything you need to decide faster
SPRING MECHANISM CONTROL
Highly stable spring mechanism ensure a consistency contact stability every time you tamp your coffee. This will guide new user to understand the amount of pressure user need for a good precise tamp.
PRECISE TAMP FOR THE 54MM PORTAFILTER
At 53.3mm, the Normcore tamp it perfectly leaving almost no coffee at the portafilter’s inner side-wall.
HIGH QUALITY 304 STAINLESS STEEL
The construction of the tamper itself is made of high quality 304 stainless steel which is critical to deliver consistency pressure to your tamp and leaving a perfect finish as user tamp off.
LEVELLING GUIDE
The levelling guide ensure all side are evenly tamp as the levelling guide sits at the portafilter which is important factor to prevent espresso shots channelling
- Brand: Normcore
- Base Diameter: 53.3mm
- Tamper Height: 90mm
- Weight: 360g , 394g with tamper stand
- Color: Matt Black Soft Touch
- Material: Aluminum Alloy + Solid Food 304 Stainless Steel
- Spring Loaded Tamper x 1
- Coffee Tamper Stand x 1
- 30lb/13.6kg Calibrated Spring x 1
- 25lb/11.3kg Calibrated Spring x 1 (Come Pre-installed)
- 15lb/6.8kg Calibrated Spring x 1
INSTRUCTIONS
- Place the tamper flat on top of your freshly ground coffee of the portafilter.
- Ensure the rim of your tamper rest nicely around the perimeter of your portafilter.
- Press down with one hand using the handle to compress the coffee.
- Continue to press down with a consistent pressure until you feel the pressure from the second internal spring, indicating that you have achieved sufficient amount of tamping pressure.
- Do a last polishing of the coffee bed in the portafilter by rotating the tamper gently clockwise / counter-clockwise (tamper twisting).
- Tamper twist action should not be done excessively. Just a slight one-clean move will do.
HOW TO REPLACE INNER SPRING
- Unfasten the tamping base, baffle, and outer spring from the handle. Next, remove the Core Sleeve from the handle.
- *If the Core Sleeve still stays behind inside the handle, try to fasten the tamping base and unfasten the Core Sleeve together by turning counterclockwise.
- Hold and press the top stud and bottom stud, remove the locking pin.
- Replace the spring with your preference.
You may also like
Christer Johansen (verified owner) –
High quality tamper, makes it a bit easier to get even more consistent shots.
Lionel (verified owner) –
Helpful in ensuring consistency through the tamp strength and making it level