Everything you need to decide faster

VISUALLY STUNNING
Crafted from premium North American walnut wood, the walnut variant of the Normcore 53.3mm V4 Spring Loaded Tamper adds an element of elegance and comfort to your coffee rituals with its expert carving.

SPRING MECHANISM CONTROL
Highly stable spring mechanism ensures a consistent contact stability every time you tamp your coffee. This will guide new user to understand the amount of pressure required for a good precise tamp.

PRECISE TAMP FOR THE 54MM PORTAFILTER
At 53.3mm, the Normcore tamps it perfectly, leaving almost no coffee at the portafilter’s inner side-wall.

TITANIUM PVD COATING
The advanced low-static coating offers enhanced durability and corrosion resistance. It also dramatically reduces the accumulation of coffee grounds that cling to the tamper after each use.

LEVELLING GUIDE
The levelling guide ensures all sides are evenly tamped as the levelling guide sits at the portafilter, which is an important factor in preventing espresso shots channelling.

Brand: Normcore
Base Diameter: 53.3mm
Tamper Height: 104mm
Weight: 274g , 301g with tamper stand
Color: Walnut Wood
Material: Stainless Steel (Titanium PVD Coating) / Anodized Aluminum / American Walnut

Spring Loaded Tamper x 1
Coffee Tamper Stand x 1
30lb/13.6kg Calibrated Spring x 1
25lb/11.3kg Calibrated Spring x 1 (Come Pre-installed)
15lb/6.8kg Calibrated Spring x 1

INSTRUCTIONS

Place the tamper flat on top of your freshly ground coffee of the portafilter.
Ensure the rim of your tamper rest nicely around the perimeter of your portafilter.
Press down with one hand using the handle to compress the coffee.
Continue to press down with a consistent pressure until you feel the pressure from the second internal spring, indicating that you have achieved sufficient amount of tamping pressure.
Do a last polishing of the coffee bed in the portafilter by rotating the tamper gently clockwise / counter-clockwise (tamper twisting).
Tamper twist action should not be done excessively. Just a slight one-clean move will do.

HOW TO REPLACE INNER SPRING

Unfasten the tamping base, baffle, and outer spring from the handle. Next, remove the Core Sleeve from the handle.
*If the Core Sleeve still stays behind inside the handle, try to fasten the tamping base and unfasten the Core Sleeve together by turning counterclockwise.
Hold and press the top stud and bottom stud, remove the locking pin.
Replace the spring with your preference.